Hi all.
I have just purchased a pass and am having issues setting up remote access.
I have used both google and the search on the flex support forum to look for similar issues and followed the troubleshooting but cannot get it working.
I have a TPLINK Archer C8 I first followed the following link tp-link.com/en/faq-742.html and attempted to set up port forwarding by adding the port 32400 manually and using the ip address 192.168.0.104 because that ip address was listed in the plex server page as shown here 
I then followed the following link tp-link.com/en/faq-734.html to try setting up a static ip address for my Macbook. The default ip for my router is 192.168.0.1 so I setup the static ip as 192.168.0.104 as shown in the screenshot and I found my mac address in system preferences/network/wifi/Hardware
After this I got a green light when I rebooted my router but the next time I started Plex I again got the not available outside your network message both with the port 32400 in the box "manually specify public port" and the checkbox ticked and clicking retry and without it or the checkbox ticked.
What am I doing wrong?
Regards
Steve